Before you begin, you will require the following tools:
- A Phillips screwdriver
- A measuring tape and pencil
- A hacksaw (With a new fine tooth blade)
- A power drill
- A 3/16" drill bit
The installation instructions
are available at the below. You will need the Adobe Acrobat
Reader to view these document. (A link to the Adobe Acrobat
Reader is at the bottom of this page.)
Measurement
Instructions
Installation
Instructions
You can also view a brief
installation video by clicking on the image below.
These installation procedures are for single door
applications. For double door applications, the same
procedures are used, but on both side of the doorway.
Required
to view PDF document.
